Note:
The image is for illustration purpose only and the product may be different from the image.
The price is for online purchase only and it may be different from the store price.

Features:

Integrated Ethernet MAC, Physical chip and transceiver one chip
Compliant to PCI Revision 2.1/2.2
PCI local bus single-chip Fast Ethernet controller
Supports PCI target fast back-to-back transaction
Supports PCI clock 16.75MHz-40MHz
Supports a 32-bit general-purpose timer, referenced by the external PCI clock source, and timer-interrupt
Include a programmable, PCI burst size and early tr/rx threshold
Supports digital and analogue loop back capability on both ports
Supports ACPI, PCI power management
Supports LAN WAKE-UP function
Complies with the IEEE 802.3 CSMA/CD, 100Base-TX and 10Base-T standard
Supports Full Duplex Flow Control (IEEE 802.3x)
Full duplex design to double the performance to 20Mbps/200Mbps
Supports Auto-Negotiation function
Auto-detects network speed
Auto-setups IRQ and I/O address
Contains two large (2Kbyte) independent receive and transmit FIFOs
One STP/UTP connector for 10Mbps or 100Mbps network speed
Provides diagnostic software and two LEDs to indicate network Link/Activity
Supports smart remote boot ROM and provides the help for Windows NT4.0 remote boot Windows 95( NF-3283/NF-3239)
Supports ODI Driver for NetWare 3.x, 4.x, NDIS Driver for LAN Manager, Microsoft Windows 95, Windows NT, Windows 2000,UNIX,Packetdriver for TCP/IP

Specifications:

Topology: Star
Connector Supported: RJ45
Standard: IEEE802.3 10Base-T, IEEE802.3u100Base-TX
Transmission Rate: 10Mbps or 20Mbps,100Mbps or 200Mbps
Hardware: IBM PC compatibles (it must have PCI slot)
IRQ Line: Assigned by system
I/O Address: Assigned by system
Software: ODI driver for NetWare 3.x, 4.x, NDIS driver for Microsoft LAN manager and Windows95, Windows NT, Packet driver for TCP/IP
Temperature: 0oC to 70oC (Operating)
Humidity: 10% to 90% (Non-condensing)